DND DC Foil Gel Base 0.5 oz #400

Easily create stunning nail designs with DND Foil Transfer prints. First, apply the DC800 Base Coat, a regular gel base coat, and cure it for 45 seconds. Next, add the DC900 Top Coat, a regular gel top coat, and cure for another 45 seconds. Then, apply the Foil Gel Base and let it cure for 60 seconds. After that, pick your favorite Foil Transfer Print and apply it directly to the nail. Finally, apply the DC900 Top Coat again and cure for 45 seconds. Note that due to formula differences, using alternate branded gel top and base coats in steps 1, 2, and 5 may yield varied results. For the best compatibility, we recommend using our gel top and base coats.

Using this DND DC Foil Gel Base is easy! First, apply the DC800 Base Coat and cure it under a lamp for 45 seconds. This helps the design stick better. Then, put on the DC900 Top Coat and cure it for 45 seconds. Now, it's time to apply the Foil Gel Base. Leave it under the lamp for 60 seconds. After that, take your chosen Foil Transfer Print and press it onto your nail. Finally, add another layer of the DC900 Top Coat and cure it for 45 seconds. Remember, different brands of gel top and base coats might not work as well because of formula differences. To get the best results, use our recommended gel top and base coats. To maintain your nail design, avoid harsh chemicals and rough activities. If the design starts to peel, don't pick at it. Instead, gently remove it and start over.